Making Hot Water - Rommelsbacher EKS 1500 Bedienungsanleitung

Step 16: Step 17:
If the appliance is not needed any Clean the appliance and the
more, switch it off and pull the accessories.
mains plug.

Making hot water

Attention: Make sure that the holes in the nozzle are always clean and not clogged.
Attention: For moving the nozzle, only touch it at the upper plastic part.
Warning: Casing, brew head, Step 1:
portafi lter, fi lter inserts and hot Prepare the appliance.
water/steam nozzle are getting hot
Step 4: Step 5:
Choose the function Switch the appliance on.
"espresso/hot water". The operation pilot lamp glows
permanently.
The appliance heats up and the
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.
Please refer to
"Cleaning and maintenance"
for further information.
regularly, refi ll water if
necessary.
regularly, empty it if
necessary.
Step 2:
Position the portafi lter without fi lter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 6:
Start hot water supply.
Turn the rotary knob to the right.
Dispense the desired quantity of
hot water.
Step 3:
Place a vessel below the outlet of
hot water/steam nozzle.
Step 7:
Stop hot water supply.
Turn the rotary knob to the top. The
appliance is ready for use.
NOTE: The appliance carries excess
water back into the water tank via a
35