Rommelsbacher EKS 1510 Bedienungsanleitung Seite 36

Step 4:
Choose the function "steam".
Step 8:
Remove the vessel.
Step 12: (cleaning/cooling)
Place a vessel below the outlet
of the hot water/steam nozzle for
cleaning the nozzle.
36
Step 5:
Switch the appliance on.
The operation pilot lamp glows
permanently.
The appliance heats up and the
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.
Step 9:
For frothing milk, dip the nozzle in
the pot with milk.
Step 13: (cleaning/cooling)
For cooling down the system, choose
the function „espresso/hot water".
The temperature pilot lamp blinks
quickly.
Step 6:
Start steam supply.
Turn the rotary knob to the right.
Produce steam for 2-3 seconds to
remove residual water from the
system.
Step 10:
Start steam supply.
Turn the rotary knob to the right.
Step 14: (cleaning/cooling)
Start hot water supply.
Turn the rotary knob to the right.
Dispense hot water for 10 seconds.
The temperature pilot lamp
extinguished und the operation pilot
lamp glows blue permanently.
Step 7:
Stop steam supply.
Turn the rotary knob to the top.
NOTE: The appliance carries excess
water back into the water tank via a
recirculation system!
Step 11:
Stop steam supply.
Turn the rotary knob to the top.
Step 15: (cleaning/cooling)
Stop hot water supply.
Turn the rotary knob to the top. The
appliance is ready for use.
NOTE: The appliance carries excess
water back into the water tank via a
recirculation system!