Making Hot Water - Rommelsbacher EKS 2000 Bedienungsanleitung

Step 12: (cleaning/cooling)
Place a vessel below the outlet of
the hot water/steam nozzle.
Step 16:
If the appliance is not needed any
more, switch it off and pull the
mains plug.

Making hot water

• With this appliance, hot water for tea etc. can be made.
• Water out of the hot water/steam nozzle has a temperature of ca. 85 °C.
• Max. 250 ml of hot water can be dispensed.
• Attention: Make sure that the holes in the nozzle are always clean and not clogged.
• Attention: For moving the nozzle, only touch it at the upper plastic part.
Warning: Casing, brew head,
portafi lter, fi lter inserts and hot
water/steam nozzle are getting hot
during use!
Step 13: (cleaning/cooling)
Choose the function "espresso/
hot water".
The pilot lamp blinks.
Please refer to
"Cleaning and maintenance"
for further information.
Step 17:
Clean the appliance and the
accessories.
• Check the water tank
regularly, refi ll water if
necessary.
• Check the drip pan
regularly, empty it if
necessary.
Step 1:
Prepare the appliance.
Step 14: (cleaning/cooling)
Start hot water supply.
Turn the rotary knob to the right.
Dispense hot water for 10 seconds.
Step 2:
Position the portafi lter without fi lter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 15: (cleaning/cooling)
Stop hot water supply.
Turn the rotary knob to the left. The
appliance is ready for use.
Step 3:
Place a vessel below the outlet of
hot water/steam nozzle.
35