Emptying The Drip Pan; Emptying The System; Descaling The Appliance - Rommelsbacher EKS 1510 Bedienungsanleitung

 Touch the stainless steel nozzle at its shaft for
removing, turn it to the right and unlock it.
‚ Then, pull the stainless steel nozzle down.
• Do not use abrasives or dissolvents or sharp objects!
• Never use a steam jet appliance for cleaning the appliance and the accessories!

Emptying the drip pan

• The drip pan collects residual water developing during operation.
• A floater inside the drip pan shows the filling level. If the floater with red marking with indication "MAX" (full) is
visible in the front area of the drip pan, it must be emptied urgently.
• Make sure no residual water is spilled when taking the drip pan out.

Emptying the system

• For transport or before a longer non-use period, we recommend emptying the system from residual water.
• For this, remove the water tank and place a collecting vessel below the hot water/steam nozzle.
• Start hot water supply until there is no water any more, then stop the supply.

Descaling the appliance

• In order to ensure flawless function, the appliance must be descaled regularly.
• Depending on the hardness of tap water, the appliance must be descaled after 30 – 50 litres or after 2 months at the
latest. We recommend descaling together with exchanging the filter.
• Observe the following instructions for descaling!
• For decalcification we recommend to use a liquid descaler from a well-known manufacturer. Please follow the notes
of the manufacturer.
• After descaling, the system must be rinsed thoroughly.
• WARNING: Only descale the appliance when cold and without water filter!
Step 1:
Remove the water tank and empty
the water
(previously remove the portafilter if
necessary).
Clean the outlet hole of the hot water/steam
nozzle thoroughly!
Step 2:
Remove filter cartridge.
 Touch the stainless steel nozzle at the shaft for
attaching it and push the nozzle on.
‚ Then, turn it to the left and lock it.
Step 3:
Fill decalcifier in the water tank.
Observe the "MAX" marking!
Step 4:
Insert the water tank.
Make sure the water tank is inserted
as far as it will go on the gasket.
39