Features; Aluminium Die-Cast Thermoblock; Water Filter; Operating Elements - Rommelsbacher EKS 1510 Bedienungsanleitung

Features

Power save function
The appliance has a power save function. The power save mode is activated 10 minutes after the last use,
i. e. the thermoblock switches off, the temperature in the heating circuit cools down slowly. The appliance
can be activated again any time and is ready for use after a few seconds. This saves energy and protects
the environment.
Single circuit system
By means of the single circuit system, coffee/espresso, hot water and milk froth can be prepared. After
preparing hot water or milk froth, the thermoblock has to cool down a little before coffee/espresso can be
prepared.
19 bar pump pressure
For aromatic espresso with perfect crema, high pressure is required. The appliance is equipped with a
high-quality pump generating high pressure up to max. 19 bar to press the hot water through the coffee/
espresso powder in the portafilter. This ensures perfect results.

Aluminium die-cast thermoblock

The thermoblock is ready for use after a short heating-up period. The massive construction of the thermo-
block ensures an always constant temperature for making espresso.

Water filter

The appliance comes with an exchangeable water filter. It cleans and demineralises the water. It ensures
a consistently good water quality and prevents the appliance from calcifying quickly. The filter must be
exchanged regularly to ensure flawless function.
Cup warmer function
The tray on the upper site of the appliance can be used as cup warmer. The waste heat of the internal
thermoblock heats this area as long as the appliance is in use and not in power save mode.

Operating elements

28
Operating panel Rotary knob