Cocraft HB920D Original Bedienungsanleitung Seite 7

Attaching a dust bag or dust extraction equipment
Start and stop the machine using the power switch
Switching on:
Press the power switch (E) to start the belt sander.
Switching off:
Release the power switch to stop the belt sander.
Variable speed control: Set the desired speed using
the speed selector knob (F).
Constant use
Switching on: Push and hold in the power switch (E)
and then push the lock-on button (G), the power button
can now be released.
Switching off: Push in the power switch and release it
without touching the lock-on button.
Sanding
• Hold the machine firmly in both hands.
• Move the machine back and forth, parallel with
the grain of the wood.
• Do not press down on the sander, the weight of
the sander is enough, too high a feed rate can burn
the workpiece and leave ugly marks.
E
E
7
F
G