Adjusting Length Of Shaft; Adjusting The Loop Handle; Converting Trimmer To Edger - Stihl FSA 45 Gebrauchsanleitung

8 Adjusting Trimmer for User
► Depress the lever (1) and hold it in that position.
► Move shaft (2) to the required position (A to D) until it
engages.
► Release the lever (1).
8.2

Adjusting Length of Shaft

The length of the shaft can be adjusted to suit the height and
reach of the user.
► Switch off the trimmer and remove the activation key.
► Hold the shaft firmly.
1
► Depress lock button (1) and hold it in that position.
► Pull or push the control handle (2) to the required position.
► Release the lock button (1).
► Move the control handle (2) back and forth until it
engages.
8.3

Adjusting the Loop Handle

The loop handle can be set in different positions to suit the
height and reach of the user.
► Switch off the trimmer and remove the activation key.
0458-718-9621-A
2
► Loosen the star knob nut (1).
► Tilt the loop handle (2) to the required position.
► Tighten down the star knob nut (1) firmly.
8.4

Converting Trimmer to Edger

► Switch off the trimmer and remove the activation key.
1
2
► Depress lock button (1) and hold it in that position.
► Rotate control handle (2) 90° until it engages.
► Release the lock button (1).
► Depress the lever (4) and hold it in that position.
► Swing the shaft (2) to the flattest position until it engages.
► Release the lever (4).
► Extend the bump guard (5) fully.
2
1
3
4
English
43