Target Group; Basic Safety Information - Siko SG60 Originalmontageanleitung

SG60, SG120
Safety information
Important operating information that may facilitate operation or many
NOTICE
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal symbols

2.3 Target group

Installation instruction are intended for the configuration, commissioning
and mounting personnel of plant or machine manufacturers who possess
special expertise in drive technology. This group of operators needs pro-
found knowledge of an wire-actuated encoder necessary connections and
its integration into a complete machinery.
Insufficiently qualified personnel
WARNING
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or wire-actuated encoder.
` Configuration, commissioning, mounting and maintenance by trained
` This personnel must be able to recognize dangers that might arise
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
• are authorized to commission, earth and label circuits and devices/

2.4 Basic safety information

Moving wire
DANGER
Abrasion or catching of limbs or clothing when touching the moving wire
during operation.
` Take protective measures to prevent people from being grasped.
Spiral spring jumping out
DANGER
Injuries such as cuts caused by the prestressed spiral spring jumping out.
` Do not open the spring casing of the wire-actuated encoder (see
SG60, SG120 · Date 24.10.2017 · Art. No. 84105 · Mod. status 319/17
expert personnel only.
from mechanical, electrical or electronic equipment.
technologies when performing configuration tasks;
systems in accordance with the safety standards.
1).
English 15
Fig.