Parkside PGG 15 D3 Originalbetriebsanleitung Seite 31

6) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
Personal safety
1) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A mo-
ment of inattention while operating power tools may result in
serious personal injury.
2) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
3) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power
source and / or battery pack, picking up or carry-
ing the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on in-
vites accidents.
4) Remove any adjusting key or wrench before turn-
ing the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal injury.
5) Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the power
tool in unexpected situations.
32 GB/IE