Command Transmitter Functions; Motor Control - Nice Patio Control Installations- Und Bedienungsanleitung

6

COMMAND TRANSMITTER FUNCTIONS

Below are the transmitter functions when they are used to con-
6 COMMAND TRANSMITTER FUNCTIONS
trol the motor or LEDs. One flash of LED "L2" (green) indicates
normal reception.

6.1 MOTOR CONTROL

COMMAND TRANSMITTER AND MOTOR CONTROL FUNCTIONS
Buttons
p
o
q
+
p o
+
q o
Slider
If a climate sensor is installed, "Table 4" summarises the behav-
iour of the motor when an event occurs (e.g. in the event of wind,
sun or rain). The motor action is not decided by the Nice receiv-
er but only by the motor. The Nice receiver only communicates
the event to the motor.
With the Nice transmitter fitted with climatic buttons, the
Note
Sun and Rain functions can be enabled / disabled using
the associated buttons. The wind sensor cannot be dis-
abled because it is a safety function.
Action
Opens, upper limit, 100%
Stop
Down, lower limit, 0%
Goes to intermediate position 1, 66%
Goes to intermediate position 2, 33%
Disabled
CLIMATIC SENSOR OPERATION
Stimuli
Wind ON Any
Wind
Wind
OFF
Sun ON
Table 3
Sun ON
Sun ON
Sun
Sun ON
Sun OFF Upper limit
Rain ON
Rain
Rain OFF Any
Motor start position Action
Until upper limit
p
Down until lower
q
Upper limit
limit
Intermediate
Until upper limit
p
position 1
Intermediate
Until upper limit
p
position 2
Lower limit, 0%
Until upper limit
p
Upper limit, 100% No action
Goes to
intermediate
position 2
Down until lower
q
Any
limit
No action
Table 4
ENGLISH – 17