Reset Settings - Nice Patio Control Installations- Und Bedienungsanleitung

5.5 RESET SETTINGS

To un-pair a remote transmitter from the receiver:
1. on any paired remote transmitter: to access the pro-
gramming level press button [PRG] 4 times; the first time
[PRG] is pressed LED "L1" (red) will flash twice; the sec-
ond time it is pressed the LED will flash twice; the third
time it is pressed the LED will flash 3 times; the fourth time
it is pressed the LED will flash 4 times
on any paired remote transmitter: to un-pair the remote
2.
transmitter, press button [OPEN
"L1" (red) will flash 3 times
on the remote transmitter to be un-paired: to confirm
3.
the operation, press button [STOP
"L1" (red) will flash 5 times.
To un-pair all remote transmitters from the receiver:
on any paired remote transmitter: to access the pro-
1.
gramming level press button [PRG] 4 times; the first time
[PRG] is pressed LED "L1" (red) will flash twice; the sec-
ond time it is pressed the LED will flash twice; the third
time it is pressed the LED will flash 3 times; the fourth time
it is pressed the LED will flash 4 times
2. on any paired remote transmitter: to un-pair all the re-
mote transmitters, press button [STOP
LED "L1" (red) will flash 3 times.
16 – ENGLISH
] for 3 seconds; LED
p
] for 5 seconds; LED
o
] for 3 seconds;
o
To un-pair all remote transmitters and delete all setting on the
receiver:
on any paired remote transmitter: press button [PRG]
1.
5 times; the first time [PRG] is pressed LED "L1" (red) will
flash twice; the second time it is pressed the LED will flash
twice; the third time it is pressed the LED will flash 3 times;
the fourth time it is pressed the LED will flash 4 times; the
fifth time it is pressed the LED will flash 5 times.