Learning Of Start And End Positions - Nice Patio Control Installations- Und Bedienungsanleitung

Programming with transmitters NOT equipped with [PRG]
and [ESC] buttons:
on the transmitter to be memorised: press the memori-
1.
sation button for 8 seconds
2. on the transmitter already memorised in "Mode I":
press button [STOP
o
flash 4 times
3. on the transmitter already memorised in "Mode I", se-
lect the desired option from the "Table 1" and program
as follows: press and release the button [STOP
number of times indicated in the chosen option; LED "L1"
(red) will flash the same number of times as the number of
impulses entered
4. on the transmitter to be memorised: press the memo-
rise button for 5 seconds; LED "L1" (red) will flash 3 times.
OPTIONS
No of presses Action
Performs an action in this sequence: opens -
1
stop - closes - stop ...
Switches off all the LEDs
2
Switches off the LEDs
3
Open
Switches off the LEDs
4
Close
To reset the receiver with a non-memorised transmitter (De-
lete everything):
on selector [S1]: switch off the receiver (1 = OFF; 2 =
1.
OFF), wait 5 seconds and switch the receiver back on (1
= ON; 2 = ON)
] for 10 seconds; LED "L1" (red) will
2. on the transmitter not memorised: press button
[STOP ] within 20 seconds; LED "L1" (red) will flash
o
twice
on selector [S1]: switch off the receiver (1 = OFF; 2 =
3.
OFF), wait 5 seconds and switch the receiver back on (1
= ON; 2 = ON)
on the transmitter not memorised: press the [PRG] but-
4.
ton 5 times.
] the
o

5.2 LEARNING OF START AND END POSITIONS

10
S3
Table 1
S1
To carry out the learning procedure for start and end positions:
on the motor control card: set the "motor force adjust-
1.
ment" [KRAFT] selector to the desired switch-off force
(this value can be modified after the positions have been
learned)
on the motor control card: set the "Speed limit adjust-
2.
ment" [SPEED] switch to the desired speed. To increase
the speed turn clockwise (this value can NOT be modified
after the positions have been learned)
L2
L1
KRAFT
SPEED
ENGLISH – 13