Rear Panel - Korg HT-70 Bedienungsanleitung

12.[▲] and [▼] switches
Use these to adjust the metronome and recorder
tempos, and to select values for various settings.
13.[ ] switch
Turns the metronome ON or OFF. Hold the switch
down if you wish to change the metronome settings
(☞p.12).

Rear panel

1. MIDI connectors
You can connect these connectors to MIDI devices
such as synthesizers, sequencers, or rhythm
machines in order to send and receive data (☞p.20).
IN
This connector receives MIDI messages. Connect
this to the MIDI OUT connector of the external
MIDI device that will be controlling the HT-70.
OUT
This connector transmits MIDI messages. Connect
this to the MIDI IN connector of the external MIDI
device that the HT-70 will be controlling.
2. USB port
You can use a USB cable from this port to connect
the HT-70 directly to your computer in order to
transfer data (☞p.22).
3. LINE OUT jack
You can connect this jack to the input jack of your
amplified speaker system and listen to the HT-70
through your system, or connect it to your record-
ing device and record the sound of the HT-70. Use a
stereo mini-plug cable.
You must make all connections with the power
turned off. Careless operation may damage the HT-
70 or the device to which it's connected, or may
cause malfunctions.
Connection cables are sold separately. You will need
to obtain the appropriate commercially-available
cables for your equipment.
6
14.[PART 1] and [PART 2] switches
1 2 3
4. DC12V jack
5. Speaker connector:
Selects the part for recording or playback (☞p.15).
When the [ ] switch is flashing, you use these but-
tons to set the volume, time signature, and other
settings.
5
Connect the included AC adapter here (☞p.7).
Connects to the dedicated speakers.
4