Alarm Function; Setting The Air Pressure Unit; Air Pressure Adjustment - Auriol H13726 Bedienungs- Und Sicherheitshinweise

... / Alarm function / Setting the air pressure unit / Air pressure adjustment
Set +1 Hr.:
Bulgaria, Estonia, Finland, Greece, Latvia, Lithuania,
Moldova, Romania, Turkey, Ukraine, Cyprus
All other time zones can be found in your Atlas or
on the Internet.

13. Alarm function

To set the alarm time, press and hold the ALARM
button for 3 seconds while the time is displayed.
When the confirmation signal has sounded, ALARM
appears on the display and the hours flash.
Use ▲ and ▼ to set the hours.
Press the ALARM button again to jump to the min-
ute setting. The minutes flash in the display.
Use ▲ and ▼ to set the minutes. Press the ALARM
button to return to the time display.
The alarm function is activated and
to the time.
Deactivating the alarm function:
Press the ALARM button twice while the time is dis-
played until disappears.
76 GB/MT
Press the ALARM button again to reactivate the alarm
function. Press the CLOCK button to return to the
time display.
If no button is pressed for approximately 20 seconds
while the switch is being made, the weather station
automatically returns to the time display.
Switching the alarm signal off:
The alarm signal sounds for approx. 2 minutes and
flashes on the display. The alarm can be turned
off prematurely by pressing the ALARM button.
Snooze function:
Press the SNOOZE / LIGHT button to pause the alarm
signal for approx. 10 minutes. During this period,
flashes above the time display.
The alarm signal then sounds again for approximately
2 minutes. You can interrupt the alarm signal again
with the SNOOZE / LIGHT button or switch it off
with the ALARM button.

14. Setting the air pressure unit

appears next Press the PRESSURE button to switch between the
units hPA (Hectopascal), mb (Millibar) and inHg
(Mercury column in inches).

15. Air pressure adjustment

When batteries have been inserted in the weather
station, an air pressure of 1013 hPa appears on the
display. This value is pre-set. You can adjust the air
pressure to suit your current location. First find out