VeGA menu item
– Replace electronics
Import the serial number / operating data from the old
electronics and transfer them to the new electronics.
Basic procedure
– Import the data from the old electronics.
– Remove the old electronics.
– Install the new electronics.
– Write the data to the new electronics.
1
VeGA
Fehler rücksetzen
Entsperren
Elektronik tauschen
Entschwefelungseinheit tausch
Medienversorgungseinheit taus
– Replace the media supply unit
After a media supply unit has been replaced, the fuel cell
system must be recalibrated. The parameters required are
contained in the txt file supplied.
Do not change the content of this file. Changes can
lead to disruption of operations and damage to the
VeGA.
1
VeGA
Fehler rücksetzen
Entsperren
Elektronik tauschen
Entschwefelungseinheit tausch
Medienversorgungseinheit taus
– Replace the sulphur-removal unit
1
VeGA
Fehler rücksetzen
Entsperren
Elektronik tauschen
Entschwefelungseinheit tausch
Medienversorgungseinheit taus
End program
1
22
1 Click the "VeGA" menu
and select "Replace
electronics".
– Follow the instructions
on the screen.
1 Click the "VeGA" menu
and select "Replace the
media supply unit".
2 Select the file.
3 Write the data.
1 Click the "VeGA" menu
and select "Replace the
sulphur-removal unit".
– Follow the instructions
on the screen.
1 Open the "File" menu
and leave the program
by selecting "Exit".
– Disconnect the
diagnosis cable.
– Switch VeGA off.
Unlock – VeGA
Prerequisites for operation:
Device
Version of the software in the device
VeGA
all
Recognition of locked / unlocked electronics
Locked / unlocked electronics is marked by a symbol and text.
1
2
Unlock electronics
To permit the electronics be unlocked, the previously specified
work steps must be observed.
1
1 Locked electronics.
2 Unlocked electronics.
3 Text.
3
1 Click the "VeGA" menu
and select "Unlock".
– A checklist with work
instructions is shown.
– Work through the
checklist and confirm.
– Click "Unlock".