Operating Instructions (Software); Intended Use; User Interface; Set Language - Truma Diagnose Tool Gebrauchsanweisung

Operating instructions (software)

Intended use

The "Error Explorer" program allows error records to be
created, imported or the error memory to be deleted in
TIN-capable devices. Locked electronics can be unlocked if
necessary.
The "Live Display" program allows operating statuses and
parameters to be shown or changed for the Combi (Gas),
Combi D or VeGA.

User interface

The programs are operated with a mouse. Values are entered
using the keyboard.

Set language

1

Warning message

1

Info / software version

1
2

Help

1
2
1 Open the "Tools" menu
and click "Select
language" to select the
menu language.
1 Acknowledge a warning
message by clicking "OK".
1 Click "?"
2 Click "Info" to open
a window to show
information about the
software.
3 Click "Close" to close the
window.
3
1 Click "?"
2 Click "Help" to display
this file.
"Error Explorer" program – Combi,
Mover®
Prerequisites for operation:
Device Version of the software in the device
Combi (Gas) > V 03.00.00
Combi D > V 04.00.00
Mover® All
– Mover® S from 01/2008

Start program

The "Live Display" program must not be active, it must
be closed first if necessary.
1
2

Search for device

1

Read error memory

1 2
Display the current action
1 Device search.
2 The error memory is exported.
3 The content of the error memory is prepared for display.
4 Status bar.
5 Device which is connected to the "Diagnose Tool".
1 Start the program by
double-clicking the icon
"Truma Diagnose Tool"
on the desktop.
2 Start "Error Explorer" in
the selection window.
1 Open the "Tools" menu
and click "Start" to start
the search.
5
4
3
17