Novoferm NovoSpeed Retail Montageanleitung Seite 14

4.29
GB
Position the safety guard. Make sure that the aluminium guard profile is fully supported
when mounted on the wall or substructure. Hook the slats of the guard into the lip of
the brackets.
4.30
3 Nm
Secure the cover with 3 M6 bolts on each
24
side.
4.31
Slide the hood over the drive and tighten it with 2 M8 bolts.
4.32
Click the side covers into place over the tension belt and the weights.
GB
25