Taking Two Calls; Making A Call - AUDIOLINE DECT4000R Bedienungsanleitung

Note: When the handset rings, the ringing tone of the handset can
be switched off for this incoming call. To do this, press the
button.
5.4

Taking two calls

You will hear acoustic signals (call waiting) if a second call is received
while you are carrying out a telephone conversation. The number of the
second caller appears in the display. Press the
succession to switch between the two callers. One caller is put on hold
while you converse with the other.
Note: In order to use the added value services provided by
DEUTSCHE TELEKOM, the Flash time setting 300 ms must
be selected (refer to Chapter 9.2.1).
Caution: The caller number display and call waiting indication
is an optional service offered by the telephone network provi-
der. The caller number appears in the display if the service is
offered by your telephone network provider. Contact your net-
work provider for further information.
5.5

Making a call

1. Enter the phone number to be called
(max. 20 digits) using the digit keypad.
Since the display can only show a
maximum of 12 digits, only the last 12
digits are displayed in the case of longer
phone numbers.
Note: If you enter an incorrect number, press the
as necessary to continuously delete the last digit in the phone
number.
2. Press the Call button
established.
Note: It is also possible to press the Call button
outside line. In the case of private branch exchanges, it is
necessary to dial a specific number (e.g. "9" or "0") in order to
obtain the dialling tone for an outside line (refer to Chapter 8
- Operation -
A and the required connection is
A 2
and
ldqtumv
1234567890
kjieghf
I
button as often
A
first to obtain an
C
buttons in
67