Restoring The Default Settings - AUDIOLINE DECT4000R Bedienungsanleitung

9.2.3

Restoring the default settings

This function resets the handset and base station settings to their status
on leaving the factory.
Default settings:
Ringing melody, handset: 1
Ringing melody, base station: 1
Receiver volume: Middle
Dialling method: Tone
Note: The phone book, caller list and redialling list are not deleted in
the event of a reset.
1. Press the Menu button
2. Press the
Note: Press the
process.
3. Confirm by pressing the
4. The default settings are restored after a
short time. The display then indicates the
equipment is ready to operate.
84
- Special Functions -
F
I
button for 2 seconds.
C
button to stop the Reset
F
Ringing volume, handset: 3
Ringing volume, base station: 3
Flash time: 1 (100 ms)
.
button.
ldqtumv
000000000)(0
kjieghf
ldqtumv
RESET?
kjieghf