Caller Number Display (Clip Function); Caller List; Selecting Phone Numbers From The Caller List - AUDIOLINE DECT4000R Bedienungsanleitung

- Caller Number Display (CLIP Function) -

7 Caller Number Display (CLIP Function)
The CLIP function enables you to view the number of a caller when a
call is received. If this function is available with your telephone line, the
number of the caller appears in the display when the phone rings. If the
caller's number is stored in the phone book, the name appears in the
display instead of the phone number.
If the caller has supressed the transfer of his phone number, PRIVAT
appears in the display. In this case, the phone number is not displayed
and, as a result, is not stored in the caller list.
A total of 10 phone numbers can be stored in the caller list so that you
will not miss any calls even if your are absent. As soon as the list is full,
the oldest phone number is deleted from the list. If new phone numbers
have been stored in the caller list in your absence, the
the display.
Caution: The caller number display function is an optional
service offered by telephone network providers. The caller
number appears in the display if the service is offered by your
telephone network provider. The display of the date and time is
not transferred by all telephone network providers. Contact
your network provider for further information. Transfer of the
phone number or the date and time is not always possible ei-
ther in some private branch exchanges.
7.1

Caller list

7.1.1

Selecting phone numbers from the caller list

Proceed as follows to view the phone numbers in the caller list in the
display:
1. Press the
number received appears in the display.
If the caller list is empty, the message
LEER appears in the display.
2. Use the
from the caller list. If no further phone numbers are available,
an acoustic signal is issued. Two display icons indicate
76
B E
or button. The last
B and E buttons to select other phone numbers
w
icon appears in
ldqtumv
1234567890
kjieghf