Increasing The Range - AUDIOLINE DECT6800 Bundle Bedienungsanleitung

16.3

Increasing the range

The range of the handset can be increased by placing additional base stations in
specific areas of the building or workplace (refer to Diagram II).
1. Position the base stations so that the ranges of the individual base stations
overlap (refer to Diagram II). If necessary, test the range of your handsets.
Obstacles in buildings, such as walls and ceilings, can restrict the range
considerably.
2. Register your handset on all base stations used (refer to Chapter 14.1).
3. Activate the automatic selection" of the base stations on the handset (refer
to Chapter 14.2).
4. If you currently have a call in Area C, this call cannot be transferred to
another base station in the Areas A, B or D.
Note: If you move too far from the respective area served by the base station, the
a icon flashes and acoustic warning signals are issued. Move towards the
relevant base station, otherwise the call will be disconnected. The
automatic transfer of a handset from one base station to another takes
approx. 2 seconds. The message SEARCH BASE appears in the display
during this period.
104
− Several Base Stations −
II
A
D
B
C