Prefix; Outside Line - AUDIOLINE DECT6800 Bundle Bedienungsanleitung

13.5

Prefix

The prefix" function enables a number to be dialled automatically before the actual
phone number. This is mainly implemented when using call−by−call numbers. Various
area access codes can be assigned to a call−by−call number or you can dial the same
call−by−call number before every call. In the case of calls dialled from the phone book
in which the area access code stored is the same, the stored call−by−call number is,
naturally, also prefixed.
Up to three different call−by−call numbers, each with 5 digits, can be stored. The
automatically prefixed call−by−call numbers do not appear in the display preceding the
dialled number.
If the Call button V is pressed first and then a phone number dialled, no
Note:
stored call−by−call number is prefixed.
MENU , X ADVANCED
X PREFIX , OK
Z, OK
X, OK
X o, X OFF or ON
X p, Z
X k, Z, OK
If no access code is entered in the k field, the call−by−call number entered
Note:
in the p field is dialled before all phone numbers.
13.6

Outside line

In the case of private branch exchanges, it is necessary to dial a specific number (e.g.
9" or 0") in order to obtain the dialling tone for an outside line. The number for the
outside line can be predialled automatically.
MENU , X ADVANCED
X PABX
Z, OK
X o, X OFF or ON
X p, Z, OK
96
− Advanced Functions −
, OK
Select menu and confirm
Select function and confirm
Enter the PIN code and confirm
Select the memory location and confirm
Select the setting required
Enter the call−by−call number
Enter the area access code and confirm
, OK
Select menu and confirm
, OK
Select function and confirm
Enter the PIN code and confirm
Select the setting required
Enter the number for the outside line and confirm