Remote Access - AUDIOLINE DECT6800 Bundle Bedienungsanleitung

17.10

Remote access

Remote access enables the answering machine to be contacted from any telephone
which uses tone dialling in order to listen to messages received and execute other
functions.
17.10.1 Remote access security code
The answering machine is provided with a personal identification number so only you
can listen to incoming messages via the remote access feature. The default security
code set at the factory is 000".
17.10.2 Changing the remote access security code
Proceed as follows to change the security code:
J
P or O, J
P or O, J
P or O, J
17.10.3 Playing back messages via remote access
Z
Y Button *, Z
Note: If an incorrect entry is made, the outgoing message is repeated. If the
security code is entered incorrectly three times, the line is automatically
disconnected.
Y
Button 2
Note: Other functions can be executed via the remote access system within the
following 8 seconds. Refer to the table in Chapter 17.10.4.
Replace receiver
17.10.4 Function keys for remote access
The functions assigned to the buttons are dependent on the mode currently activated.
The following table provides an overview of the respective functions assigned to the
individual buttons.
Button Functions during playback of
Options menu
1
2 Play back message
3
4 Play back memo
5 Stop recording
6 Play back outgoing message
7 Recording the memo
108
− Telephone Answering Machine −
Press for 2 seconds
Change 1st digit and confirm
Change 2nd digit and confirm
Change 3rd digit and confirm
Dial your own phone number
Press during the outgoing message and enter the
PIN code
The Options menu is played
Play back message
End remote access
Functions during playback of a
message
Play back previous message
Play back current message again
Play back next message
Stop current message