Putting The Telephone Into Operation - AUDIOLINE DECT 8848 Bedienungsanleitung

Putting the Telephone into Operation

2 Putting the Telephone into Operation
Safety information
Attention: It is essential to read the Safety Information in
Chapter 1 before starting up.
Checking the package contents
The package contains:
− a base station with power
adapter plug
− a handset
Connecting the base station
Attention: Position the base station at least 1 m away from other
electronic devices, otherwise there is a risk of mutual disturb-
ance.
Connect the base station as illustrated in the diagram. For reasons of
safety, only use the power adapter plug and telephone connection line
supplied.
Telephone line socket
Mains power outlet
Connecting the charging station
Plug the power adapter plug in a properly installed mains power outlet.
28
Downloaded from www.Manualslib.com
− a telephone connection cable
− two batteries
− an operating manual
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 14 ct/min)
manuals search engine
Inserting the batteries
Open the battery compart-
ment and insert the batteries.
Only use batteries of the type
AAA NiMH 1.2 V. Pay atten-
tion to correct polarity. Close
the battery compartment
cover.
Charging the batteries
Before the handset is used for the first time, insert it in the base station/
charging station for at least 14 hours. When the handset is inserted in the
base/charging station properly, you will hear an acoustic confirmation sig-
nal and the charge control lamp lights up. The handset warms up during
the charging process. This is normal and does not represent a risk. Do not
charge the handset with charging units from other manufacturers.
The current battery charge status is indicated in the display:
Full Half empty
Private branch exchanges
If you want to connect the telephone to a private branch exchange, more
information is provided on Page 40.
28
Low Empty