Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.3
Setting up conference calls
You can connect a second internal handset with an external call to set up a three-way
conference. To connect two handsets with an external call:
set up the desired connection with the external caller. Then press the
by the number of the handset bOng called. Once the second internal caller has answered,
press the # button for 2 seconds and all three callers will be connected in a conference call.
9.4
Logging on and logging off handsets
9.4.1
Logging on handsets
1.
Press and hold the page button
tones. Now log on the new mobile unit to the base station within 90 seconds.
2.
Press the Menu display button on the mobile unit.
3.
Select the Registration menu with
4.
Confirm the Register H/S message with the OK button.
5.
Now enter the number of the base station (1 - 4) using the number pad. If the mobile
unit is already connected to a base station, the number of the base station
concerned will not flash.
6.
You must now enter the PIN code of the base station (factory setting 0 0 0 0).
7.
Confirm your entry with OK and the system will search for the base station. The
mobile unit will be logged on and can be used for external and internal calls.
8.
An internal number will now be automatically assigned to the mobile unit. The main
mobile unit already logged on has the internal number 1. The second mobile unit
logged on is given the internal number 2, 3, 4 or 5. This internal telephone number
will be indicated on the right of the display.
9.4.2
Logging on other DECT-GAP telephones to the base station
In order to log on a DECT-GAP handset, follow the instructions in the other supplier's
operating manual. Then press the
seconds. Use the PIN-Code to log on (factory setting 0 0 0 0).
- Multiple handsets -
on the base station until you hear two signal
and
button on the base station of the DECT8049 for 6
and confirm with OK.
button followed
65
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
