Multiple Mobile Units; Logging On Dect3300 Mobile Units; Logging On Other Dect-Gap Telephones To The Base Station - AUDIOLINE DECT3300B Bedienungsanleitung

8.4

Multiple mobile units

It is not possible to add more additional handsets onto your base station. The maximum total
number amounts to 2 handsets.
8.4.1

Logging on DECT3300 mobile units

1. Press and hold the page button
hear two signal tones. Now log on the new mobile unit to the base station within
90 seconds.
2. Press the
3. Select the SETTINGS menu with
4. Select the REGISTER menu with
5. Now enter the PIN code for the base station using the number pad (factory setting
0 0 0 0) and confirm with
6. A search will now be carried out for the base station and after a few seconds you
will hear a signal tone. The mobile unit is now logged on and can be used for
external and internal calls.
7. An internal number will now be automatically assigned to the mobile unit. The
mobile unit that has already been logged on has the internal number 1. The
second mobile unit to be logged on is given the internal number 2. These internal
numbers are shown in the right of the display next to the name.
8.4.2

Logging on other DECT-GAP telephones to the base station

In order to log on a DECT-GAP mobile unit from another manufacturer, follow the
instructions in the other supplier's operating manual and then press the
base station for 3 seconds. Use the PIN-Code 0 0 0 0 to log on (factory setting).
Downloaded from www.Manualslib.com
- Special functions -
button on the mobile unit.
.
manuals search engine
on the base station for 3 seconds until you
and and confirm with
and and confirm with
.
.
button on the
53