Replacing The Filter Cartridge - SWM RS 300 R Handbuch

CLEANING THE METAL FILTERS
After draining the oil as described above, operate as
follows:
• Unscrew the cap (3) and remove the filter (4).
• Clean the filter (4) using petrol.
• Check the condition of the O-ring (5) and replace
it if worn.
• Refit everything operating in reverse order from
removal taking care to correctly position the alu-
minium washer (6).
• Undo the two screws (7) and remove the cap (8).
• Clean the filters (9) and (10) using petrol.
• Check the condition of the O-rings (11) and (12) and
replace them if worn.
7
3
5
8
4
6
3
EN - 22
• Refit everything operating in reverse order from
removal taking care to correctly position the O-
rings (11) and (12).
• Once you have replaced the filters, refit the drain
cap (2) and the engine guard (A) and pour in the
required amount of oil.
2
9
11
10
8
12
7

REPLACING THE FILTER CARTRIDGE

After draining the oil as described above, operate as
follows:
• Undo the two screws (13) and remove the guard
(14).
• Undo the three screws (15) and remove the cap
(16).
• Replace the filter (17).
• Check the condition of the O-ring (18) and replace
it if worn.
A
15
14
13
16
15a