SWM RS 300 R Handbuch Seite 120

PADS CLEANING
Be careful that no brake fluid or any oil gets on
brake pads or discs. Clean off with alcohol any fluid
or oil that inadvertently gets on the pads or disc.
Replace the pads with new ones if they cannot be
cleaned satisfactorily.
PADS INSTALLATION
- Install new brake pads.
- Reassemble the two pins (2) and the clips (1).
FRONT
2
1
EN - 48
WARNING*: Do not attempt to ride the motor-
cycle until the brake lever or pedal are fully ef-
fective. "Pump" with the brake lever or pedal
until the pads are against the discs. The brake
will not function on the first application of the
lever or pedal.
REAR
1
3