Berkel VOLANO B3 Bedienungsanleitung Seite 17

7.3 LUBRICATING THE
GUIDE BARS OF THE
CARRIAGE AND OVERPLATE
- After each cleaning operation
of the machine put a few
drops of oil in the hole along
the sliding bar (1) and on
regulating knob for slice
thickness (2);
- Put a few drops of oil in
the holes (3 e 4).
- Put a few drops of oil in
the points (5 and 6).
- Put few drops of oil on
the flywheel briefly
and turn it (7).
NOTE: ONLY USE WHITE
VASELINE OIL. DO NOT
USE VEGETABLE OILS
VOLANO B3
17