Using The Slicing Machine; Loading The Goods; Cutting The Goods - Berkel VOLANO B3 Bedienungsanleitung

EN
6. USING THE SLICING
MACHINE

6.1 LOADING THE GOODS

- Using the flywheel (1) bring the carriage (2)
all forward (towards the operator);
- Pull back the sliding overplate (3) completely
(away from the blade) using the handwheel
(4) or the rapid advance lever (5);
- Place the food to be sliced on the overplate
and block it with the food press (6) regulating
the height as well;
- Regulate the thickness of the slice by pulling
and rotating the knob (7) at the same time,
graduated from 0 to 9;
- Bring the overplate with the goods towards
the blade by using the rapid advance lever
or the handwheel;
14

6.2 CUTTING THE GOODS

- Turn the flywheel clockwise (do not turn it coun-
ter clockwise, this could seriously damage the
machine);
- During the forward movement of the carriage
(away from the operator) the goods will go
into the blade and the slice, guided by the
slice deflector, will fall onto the plate below;
- During the return movement of the carriage
(towards the operator) the mechanical device
which makes the overplate advance transver-
sally towards the blade will be put into mo-
tion, its value pre-determined with the slice
thickness regulating knob.