RIDGID SeekTech SR-20 Bedienungsanleitung Seite 24

Figure 35: Selecting a Frequency Category
Then use the Up and Down Keys to scroll through the
available frequencies. Highlight the desired frequency to add
it to the currently available list .
Checking a frequency (using the Select Key) will enable it to
be included in the "Currently Available" list of frequencies on
the Main Menu.
Selected frequencies in the Checked-Active set can be
switched while the SR-20 is in use, by pressing the Frequency
Key. The SR-20 will cycle down the list through the set of
active frequencies from low to high, group by group, and
repeat. Unchecking a frequency in the Main Menu will
deactivate it, and it will then not appear when pressing the
Frequency Key.
Information Screen and Restoring Defaults
•
Information Screen
The information screen appears at the bottom of the menus
choices list. Pressing the Select Key displays information
about your locator, including software version, serial number
of the receiver, and its calibration date (Figure 36).
Figure 36: Information Screen
Restore Factory Defaults
Pressing Select a second time will display the Restore Factory
Defaults option.
Use the Up and Down Keys to highlight either the "check"
symbol to restore factory defaults, or the "X" symbol to NOT
restore them.
Pressing the Menu Key without changing either checkbox
will exit the option and leave things as they were.
Ridge Tool Company
seekTech sR-20
Tools For The Professional
TM