Button Function; Lcd-Display - SPORTSTECH EX400 Benutzerhandbuch

RESET
•
In setting condition, press RESET key once to reset the current function figures.
•
Press RESET key and hold for 2 seconds to reset all function figures, and have Bi
sound for prompt at the same time.
SET
•
Each adding by pressing once, press and hold the button to increase the value faster
•
TMR setting range: 0:00~99:00 (Each increment is 1:00)
•
CAL setting range: 0~9990 (Each increment is 10)
•
DST setting range: 0.0~999.0 (Each increment is 1.0) KM
MODE
•
Choose each function by pressing MODE key. In SCAN mode, press MODE key can
lock the current function.
•
Press MODE key and hold for 2 seconds to reset all function figures.
Power on
•
LCD will display all segments with Bi sound as
Power off
•
Without any signal been transmitted into the monitor for 4 minutes, and the monitor
enter to SLEEP.

6.2. BUTTON FUNCTION

6.3. LCD-DISPLAY

Drawing A
48