Trouble Shooting - SPORTSTECH EX400 Benutzerhandbuch

Operation
•
When monitor power on (or press MODE, RESET key and hold for 3 seconds), LCD
will display all segments with Bi sound for one second and enter to SCAN mode as
Drawing B.
•
With any signal been transmitted into the monitor, the value of TMR, DST, and CAL
will start to count up as Drawing C.
•
Without any signal been transmitted into the monitor for 4 minutes, the monitor will
enter to SLEEP mode.
•
When the display show Drawing D, it means the batteries need to be changed.
•
If there is no signal when you pedal, please check if the cable is well connected.
•
Battery low display:
Drawing B
Drawing C

6.4. TROUBLE SHOOTING

Drawing D
49