SCAN
•
The sequence of display: TMR > SPD > DST > CAL > ODO > PULSE.
•
In SCAN mode, press MODE key to choose other functions.
•
Automatically scan through each mode in sequence every 6 seconds.
SPEED (SPD)
•
W/O any signal been transmitted into the monitor for 4 seconds, SPEED will display
"0.0"
•
Display current training speed.
TIME (TMR)
•
W/O setting the target value, time will count up.
•
With setting the target value, time will count down from your target time to 0, and as
0 is achieved time alarm.
•
W/O any signal been transmitted into the monitor for 4 seconds, time will STOP.
•
Range 0:00 ~ 99:59
DISTANCE (DST)
•
W/O setting the target value, distance will count up.
•
With setting the target value, distance will count down from your target distance to 0,
and as 0 is achieved distance alarm.
•
Range 0.0~999.9 KM
6.1. DISPLAY FUNCTIONS
46