Instructions For Logging Duofern Transmitters On / Off - RADEMACHER RolloTron Basis DuoFern1200 Original - Betriebs- Und Montageanleitung

14. Instructions for logging DuoFern transmitters on / off

In order for your RolloTron Basic DuoFern 1200 to react to
control signals from the DuoFern network, it is necessary
to log each DuoFern transmitter (e.g. DuoFern manual
central operating unit or HomePilot®) on to the RolloTron
Basic DuoFern 1200.
To do so, please read the instruction manual
for the respective DuoFern transmitter.
Maximum number of connected devices
You can assign a maximum of 20 DuoFern transmitters
to a single RolloTron Basic DuoFern 1200.
i A RolloTron Basic DuoFern 1200 cannot be
connected to another RolloTron Basic
DuoFern 1200 device.
Additional information about logging on can
be obtained from the login matrix on our web-
site under:
www.rademacher.de
EN
79