Operating Buttons And Indicator Light - RADEMACHER RolloTron Basis DuoFern1200 Original - Betriebs- Und Montageanleitung

i

4.1 Operating Buttons and Indicator Light

1)
2)
3)
4)
Pos. Symbol
1) +
2)
3)
green
red
4)
6)
5)
AUTO
5)
6)
Description
Up/Stop button + Down/Stop button
The roller shutters travel up / down or stop
Indicator Light - Status Display
flashes ◆ Connection is active
briefly ◆ When configuring the sunshine position
continuous ◆ 5 sec = connection / disconnection was successful
light ◆ 5 sec = clearing was successful
flashes ◆ Return signal when pressing the setting buttons
briefly
flashes ◆ Disconnect or clearing is active
briefly ◆ When configuring the end points
◆ Resetting is carried out
◆ The running time limit is triggered
continuous ◆ 5 sec = connection / disconnection failed
light ◆ 10 sec = automatic functions = ON
Set button
Setting both end points
AUTO button
Switching the automatic functions on/off
DuoFern button (connect / disconnect)
Logging on/off in the DuoFern radio network
EN
57