Intended Use - RADEMACHER RolloTron Basis DuoFern1200 Original - Betriebs- Und Montageanleitung

i

7.1 Intended use

Only use the RolloTron Basic DuoFern 1200 for opening
and closing roller shutters with a permissible belt.
i Mechanical locks of any kind are not suitable
for automated operation with this device.
Only use original spare parts from RADEMACHER.
◆ By doing so, you avoid the risk of malfunctions and
damage to your RolloTron Basic DuoFern 1200.
◆ As the manufacturer, we provide no guarantee for the
use of third-party components and accept no liability
for consequential damage resulting from such.
◆ All repairs to the RolloTron Basic DuoFern 1200
must be undertaken by authorised customer service
personnel.
66
Operating conditions
◆ Only operate the RolloTron Basic DuoFern 1200 in
dry rooms.
◆ A 230 V / 50 Hz power supply, together with a site-
provided isolating device (fuse, MCB), must be per-
manently available at the installation location.
◆ An easily accessible 230 V / 50 Hz socket must be
available at the installation site if the enclosed con-
necting cable with Euro plug is being used.
◆ The roller shutters must run up and down smoothly
and should not stick.
◆ The mounting surface for the RolloTron Basic
DuoFern 1200 must be flat.
◆ The installation and operation of the RolloTron Basic
DuoFern 1200 is only permitted for those systems
and devices where a malfunction in the transmitter
or receiver would not cause a danger to personnel
or property or where this risk is already covered by
other safety equipment.
i
Radio systems which transmit on the same
frequency can cause interference.
EN