Shipping And Handling - Nuova Simonelli OSCAR Gebrauchanweisungen

To facilitate aeration of the unit, position the
aeration portion of the machine 15 cm from walls
or other machinery.
Once you have started washing the machine,
complete the job or residues of detergent could
be left inside the dispensing assembly.
Remember that to install, maintain, unload and
regulate the unit, the qualified operator must
always wear work gloves and safety shoes.
When adding the coffee, the operator must never
put his hands into the container.
The noise level of the machine is less than 70db.
For machines connected to the mains water
supply, the minimum pressure must be 0.6 MPa
and the maximum pressure for correct machine
operation must not exceed 1.3MPa.
CAUTION
INFORMATION TO THE USERS
Under the senses of art. 13 of
Law Decree 25th July 2005, n.
151 "Implementation of the
Directives/ Guidelines 2002/95/
CE, 2002/96/CE and 2003/108/
CE, concerning the reduction of
the use of dangerous substan-
ces in electric and electronic
equipment, as well as the disposal of wastes".
The symbol of the crossed large rubbish container that is
present on the machine points out that the product at the
end of its life cycle must be collected separately from the
other wastes. The user for this reason will have to give the
equipment that got to its life cycle to the suitable separate
waste collection centres of electronic and electrotechnical
wastes, or to give it back to the seller or dealer when buying
a new equipment of equivalent type, in terms of one to one.
The suitable separate waste collection for the following
sending of the disused equipment to recycling, the dealing
or handling and compatible environment disposal contribu-
tes to avoid possible negative effects on the environment
and on the people's health and helps the recycling of the
materials the machine is composed of. The user's illegal
disposal of the product implies the application of administra-
tive fines as stated in Law Decree n.22/1997" (article 50 and
followings of the Law Decree n.22/1997).

SHIPPING AND HANDLING

MACHINE ID
When communicating with the manufacturer Nuova
Simonelli, always cite the machine ID number.
The machine is transported on pallets containing several
machines inside cartons strapped to the pallet.
Operators performing any shipping or handling operations
must
• wear gloves, safety shoes and overalls with elasticized
cuffs.
Always move pallets using adequate equipment (i.e. fork lift
trucks).
CAUTION
DANGER OF IMPACT OR PINCHING
During handling, the operator must make certain that
there are no persons, things or objects in the vicinity.
Slowly lift the pallet approximately 30 cm off the ground
and drive to the loading zone. After having made certain
that there are no obstacles, things or persons in the
way, proceed with loading.
Once the destination has been reached, again using
adequate lifting equipment (i.e. fork lift truck) and after
having made certain that there is nothing and no one in
the unloading area, set the pallet on the ground and
move it to the storage area; always carry the load at a
height of approximately 30 cm from the ground.
CAUTION
DANGER OF IMPACT OR PINCHING
Before performing the following operations, make cer-
tain that the load is in stable and will not fall when the
straps are cut.
Wearing gloves and safety shoes, the operator must
cut the straps and store the product. During this opera-
tion, see the product technical features for the weight
of the machine being stored and proceed as necessary.
DANGER OF POLLUTION
Once the machine has been released from the pallet or
container, do not pollute the environment with these
items.
15