Safety; General Safety Information; Personal Safety Information; Electrical Safety Check - Invacare Aquatec Ocean Servicehandbuch

2 Safety

2.1 General safety information

WARNING!
Risk of injury or damage to property
– The procedures in this manual must only be
performed by a qualified technician.
– Use only original accessories and spare parts.
– Do not handle this product or any available
optional equipment without first completely
reading and understanding these instructions
and any additional instructional material such
as user manuals, installation manuals or
instruction sheets supplied with this product
or optional equipment.
– After each assembly, check that all fittings are
properly tightened and that all parts have the
correct function.
WARNING!
Risk of contamination
– Clean and disinfect the product before
servicing.
IMPORTANT!
Assembly of accessories might not be described
in this service manual. Refer to the manual,
delivered with the accessory.
– Additional manuals are available on request.
See addresses at the end of this document.
IMPORTANT!
Some replacement parts are only available as
a kit. Always use the complete new kit when
replacing a part.
– Spare parts can be ordered from Invacare.
Refer to your local Invacare website to access
the electronic spare parts catalogue (ESPC).
1640651-A
IMPORTANT!
Refer to the user manual of this product for
information on
– Technical data
– Product components
– Labels
– Additional safety instructions
– Cleaning and disinfection instructions
The information contained in this document is
subject to change without notice.

2.2 Personal safety information

These safety instructions are intended to help avoid
accidents during work and must be observed under all
circumstances.
All employees coming into contact with contaminated
products must regularly consult a company doctor.
Work clothing and personal protective equipment must
be available in necessary quantities and be in proper
condition. Reliable hand and surface disinfection must be
ensured.
WARNING!
Risk of contamination
– Clean and disinfect the product before
carrying out repairs.

2.3 Electrical safety check

IMPORTANT!
Regular electrical checks according to EN 62353
(VDE0751) must be carried out in line with
national requirements.
1. Inspect all electronic components for damage to the
casing or cable, test functions and check for stray
current.
Safety
5