Setting Up The Pressure Bonding Tool - Pioneer SGY-PM900H79 Benutzerhandbuch

Setting up the Pressure Bonding Tool

1
Mount the pressure bonding tool on the table, turn the knob counterclockwise to raise the pressure
bonding surface to the top.
•
When you mount the pressure bonding tools on the edge of the table, separate them by about 30 centimeters.
2
Insert the adapter so the arrow points to the right and use a clamp to fix it in position.
There are two types of adapters, a left and a right. Assemble the adapter for the crank on which you are installing the
sensor.
EN
9