Herunterladen Inhalt Inhalt Diese Seite drucken

Calibrating With A Load On The Pedals - Pioneer SGY-PM900H79 Benutzerhandbuch

Pedaling monitor sensor
Vorschau ausblenden Andere Handbücher für SGY-PM900H79:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Calibrating with a Load on the Pedals

1
Measure the distance from the face of the crank arm to the center of the pedal to be used with the
system.
2
Screw the "R" end of the calibration pedal bolt into the pedal hole of the crank, adjust so length from
the surface of the crank to the outer groove is the length measured in step 1.
Screw in the "L" end to calibrate the left side.
See page 37 regarding the engraving on the calibration pedal bolt.
3
Hang the calibration weight onto the outer groove of the calibration pedal bolt.
EN
Calibration
41

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis