Pioneer SGY-PM900H79 Benutzerhandbuch Seite 52

EN
Troubleshooting
Symptom
When the transmitter's cover
was installed the seal was
weak.
There is sand or oil on
the rubber gasket in the
transmitter.
52
Cause
The rubber gasket in the
transmitter is deteriorating.
―
User
We recommend periodically replacing
the rubber gaskets inside the
transmitters of the sensors. (Non-
warranty)
Using the equipment while the rubber
gaskets are deteriorated may damage
the product.
Contact your dealer.
It is necessary to replace the rubber
gaskets if bicycle oil, cleaner, mud, or
sand has gotten on them, even if they
are not deteriorated. (Non-warranty)
Contact your dealer.
Solution
Dealer
Replace the rubber gaskets. (page 57)
If replacements are needed, please
visit our website.
Replace the rubber gaskets. (page 57)
If replacements are needed, please
visit our website.