Continuous Flow - WimTec ECOSAN W6 Montage- Und Bedienungsanleitung

ECOSAN W6
Description of the functions
Continuous fl ow:
DIP switch 3
Enable the continuous fl ow function to fi ll the washbasin or a container as well as
for thermal disinfection�
"ON" position = Continuous fl ow function enabled�
"OFF" position = Continuous fl ow function disabled (preset)�
Enable continuous fl ow:
3 x
Disable continuous fl ow:
|
1.
Touch the infrared sensor fi eld gently in the center - the water fl ow
starts - and stay�
2.
After the monitoring LED fl ashes three times, the water fl ow is
briefl y interrupted and continuous fl ow is activated for the fl ushing
stop time confi gured�
Automatic:
Once the confi gured fl ushing stop time has elapsed (fl ushing stop
time control, see p� 27)�
Manual:
1. To instantly end the fl ushing stop, approach the infrared sensor
with your hand again
3 x
2.
After the icon fl ashes three times, continuous fl ow is disabled
and the fi tting will resume normal operation�
and hold it there�
(approx� 3 cm)
WimTec ECOSAN W6
Washbasin fi tting
EN
ON
OFF
1 2 3 4 5 6
35