Intelligent Stagnation Flush - WimTec ECOSAN W6 Montage- Und Bedienungsanleitung

EN
ECOSAN W6
Description of the functions
Intelligent stagnation fl ush:
DIP switch 4
Serves to rinse water supply lines in order to prevent the growth of microbial
pathogens such as legionella and to protect the health of the users when prolonged�
"ON" position = Intelligent stagnation fl ush activated�
"OFF" position = Intelligent stagnation fl ush deactivated (preset)�
3 - 48 h
10 s or 20 s
36 Washbasin fi tting
To adjust, proceed as follows:
1. Time interval
Specifi es the time between the last use and stagnation
fl ush� Adjustable from 3 to 48 h (24 h preset) at the interval
control (see p� 27)�
2. Set the stagnation fl ush duration
Indicates the automatic stagnation fl ush duration� Adjustable
for 10 s or 20 s (10 s preset) on DIP switch 5 (see p� 27)�
3. Intelligent stagnation fl ush
If the fi tting has not been used for the set period, stagnation
fl ushing is triggered for the duration confi gured�
If a user is in the response range or the cleaning stop is
activated, the automatic stagnation fl ush is triggered only 2
minutes after leaving the response range or deactivating the
cleaning stop�
WimTec ECOSAN W6
ON
OFF
1 2 3 4 5 6