Safety Measures - Mettler Toledo InPro 7108-VP/ CPVC Bedienungsanleitung

InPro 7100-VP Series
manufacturer, are not recommended and can lead to harm or injury to
material/equipment and persons. This is also relevant for applications
which do not comply with the technical data labeled on the sensor. For any
damage arising from such misuse, the user assumes full and sole
responsibility.
2.3

Safety measures

The InPro 7100-VP Series sensors have been manufactured in line with
state-of-the-art technology and in accordance with accepted technical
safety regulations. Nevertheless, the sensors can still represent a source
of risk and danger:
– if the sensors are operated by insufficiently trained personnel,
– if the sensors are employed incorrectly or not as intended by the
manufacturer,
– if the sensors are not regularly maintained or serviced.
Local legislation and regulations must be observed at all times. Such
stipulations do not form an integral part of this instruction manual.
It is necessary to use protective gear, including gloves, for persons coming
in contact with the fluid. It is recommended to use gloves when handling
the electrodes of the sensor to limit contamination of the sensor.
The user is responsible for the instruction and training of personnel. Addi-
tional copies of the instruction manual can be ordered from your supplier.
This instruction manual is an essential element of the sensor equipment
and must at all times be readily available to operators directly at the mea-
surement site.
Before the sensor is removed from the process/process adapter, it must be
ensured that the process pressure has been reduced to a safe level and the
process temperature lowered to a safe range. Any escape of hot process
fluid under pressure can cause damage to material/equipment or injury to
persons.
No modification whatsoever may be carried out on the sensors. Any
unauthorized modification or manipulation of the sensors results in imme-
diate expiration of the full scope of warranty granted by the manufacturer.
© 02 / 2017 Mettler-Toledo GmbH, CH - 8606 Greifensee
Printed in USA
InPro 7100-VP Series
52 002 092
9