Introduction; Safety Measures - Mettler Toledo SevenEasy S30 Bedienungsanleitung

1.

Introduction

The METTLER TOLEDO SevenEasy™ conductivity meter is an instrument offering far more than simple
conductivity measurements without breaking your budget. It is an instrument with many advantages:
- SevenEasy saves you time. The user interface is designed in such a logical way that you will no
longer need to consult your user manual.
- SevenEasy can be battery operated. Thanks to this option you can now easily move your instrument
from one working area to another even if no power supply is available.
- SevenEasy has additional advantages. Our Service Option provides regular equipment qualifications
that will improve the reliability and accuracy of your instrument.
2.

Safety measures

Measures for your protection
- Never work in an environment subject to explosion hazards! The housing of the instru-
ment is not gas tight (explosion hazard due to spark formation, corrosion caused by
the ingress of gases).
- When using chemicals and solvents, comply with the instructions of the producer and
the general lab safety rules!
Measures for operational safety
- Have the instrument serviced only by METTLER TOLEDO Service!
- Always wipe off splashed liquids immediately! The instrument is not waterproof.
- Use batteries of the specified type only. Otherwise, proper operation cannot be guaran-
teed.
- Exclude the following environmental influences:
• powerful vibrations,
• direct sunlight,
• atmospheric humidity greater than 80%,
• corrosive gases,
• temperatures below 5 °C and above 40 °C,
• powerful electric or magnetic fields !
METTLER TOLEDO SevenEasy™ conductivity
Introduction / Safety measures
3