Safety Measures - Mettler Toledo FiveEasyPlus FEP20 Bedienungsanleitung

2 Safety measures
Measures for your protection
Risk of explosion
Risk of corrosion
Measures for your operational safety
Caution
4

Safety measures

●
Never work in an environment subject to explosion hazards! The housing of
the instrument is not gas tight (explosion hazard due to spark formation,
corrosion caused by the ingress of gases).
●
When using chemicals and solvents, comply with the instructions of the
producer and the general lab safety rules!
● Never unscrew the two halves of the housing!
● Have the meter serviced only by METTLER TOLEDO Service!
● Any spillage should be wiped off immediately! Some solvents might cause
corrosion of the housing.
●
Avoid the following environmental influences:
•
Powerful vibrations
•
Direct sunlight
•
Atmospheric humidity greater than 80%
• Corrosive gas atmosphere
• Temperatures below 5 °C and above 40 °C
• Powerful electric or magnetic fields