Safety Measures - Mettler Toledo InPro 7100-VP-Serie Bedienungsanleitung

InPro 7100-VP Series
2.3

Safety measures

The InPro 7100-VP Series sensors have been manufactured in line with
state-of-the-art technology and in accordance with accepted technical safety
regulations. Nevertheless, the sensors can still represent a source of risk
and danger:
– if the sensors are operated by insufficiently trained personnel,
– if the sensors are employed incorrectly or not as intended by the manu-
facturer,
– if the sensors are not regularly maintained or serviced.
Local legislation and regulations must be observed at all times. Such
stipulations do not form an integral part of this instruction manual.
It is standard laboratory practise for persons handling or using the sensors
to wear personal safety equipment such as protective goggles and protec-
tive clothing.
The user is responsible for the instruction and training of personnel. Addi-
tional copies of the instruction manual can be ordered from your supplier.
This instruction manual is an essential element of the sensor equipment
and must at all times be made readily available to operators directly at the
location of employment of the sensors.
Before the sensor is removed from the process/process adapter, it must be
ensured that the process pressure has been reduced to a safe level and the
process temperature lowered to a safe range. Any escape of hot process
medium under pressure can cause damage to material/equipment or
injury to persons.
No modification whatsoever may be carried out on the sensors. Any
unauthorized modification or manipulation of the sensors results in imme-
diate expiration of the full scope of warranty granted by the manufacturer.
© 10 /12 Mettler-Toledo AG, CH - 8606 Greifensee
Printed in USA
InPro 7100-VP Series
52 002 092
9