Replacing The Exhaust-Pipe - Betamotor RR 400 Bedienungsanleitung

REPLACING THE EXHAUST-PIPE

The description of the exhaust-pipe substi-
tution is purely informative; actually is ad-
visable to turn to a BETAMOTOR shop in
order to make this.
As for substitution you must proceed in the
following way:
•Put the motor-cycle on the stand under the
motor
•Remove the saddle (vedi pag. 125)
•Remove the right and the left lateral
bumper (vedi pag. 126).
•Remove the right back side (vedi pag.
126)
•Remove the silencer 1 unscrewing the two
fixing screws 2 and the spring 3 united
to the exhaust-pipe
•Remove all the four fixing screws 4 (two
on the right and two on the left) of the
loom5
•Release with a screwdriver the coupling-
box filter fixing clamp 6
•Disconnect the back plant connectors and
the starting relé cutting the clamp (the
picture on the bottom shows the connec-
tors disposition under the tank)
1
4
6
147
2
3
5
5
GB