Betamotor RR 400 Bedienungsanleitung Seite 126

3
Removing the front side panels
Unscrew the eight fixing screws E (four on
E each side) and remove the panels.
Removing the rear side panels
F Unscrew the four fixing screws F (two on
each side) and remove the panels. The
upper screw fixes the saddle as well as
the rear panel.
Removing the right-hand side bumper
Unscrew the six fixing screws G, remove
the plastic strap and take off the side
bumper (if present).
G
Removing the left-hand side bumper
Unscrew the four fixing screws H, remove
the two plastic straps and take off the side
bumper (if present).
H
GB
126